Machine leveler - adjustable foot SFEL 80 for ground mounting

Machine foot, machine leveler, adjustable foot vibration damped stainless steel SFEL 80, for ground mounting

Thread M Please choose!

Thread length (mm) Please choose!

SKU: SFEL80

Price per item

€11.79 excl. 19% Vat
excl. Shipping & package

DISCOUNT

DELIVERY

Machine foot / adjustable foot / vibration damper SFEL 80 for floor-mounting stainless steel sketch

Accessories

Nut and washer stainless steel

Variations

	Machine mount - adjustable foot SF 80 vibration-damped
	Adjustable foot - machine mount SF 80 ESD - electroconductive
	Machine mount - adjustable foot SFL 80 for ground mounting

Foot plate: stainless steel 1.4301 - AISI 304
Threaded spindle: stainless steel 1.4301 - AISI 304
Damping plate: vulcanized NBR, 70° Shore A, black (on request alternatively 50°/85° Shore A)

The austenitic and acid-resistant stainless steel 1.4301 - AISI 304 (also called V2A or 18/10 Cr-Ni steel) has a particularly low carbon content and is the most commonly used stainless steel. It is resistant to corrosion and has good mechanical properties.

The stainless steel is resistant to oxidation, water, water vapor, humidity, food acids as well as weak organic and inorganic acids and is therefore easy to clean.

The synthetic special rubber of the vulcanized damping plate NBR is suitable for high demands on the swelling resistance against fuel, oil, grease and alphatic solvents.

This machine leveler or adjustable foot is also available in chrome plated steel. Further Shore hardnesses on request.

Machine levelers made of stainless steel are used particularly in areas where hygiene plays an important role. Moreover, its high-quality optics is highly appreciated.

Our high-quality, precision-machined machine levelers offer the advantage of reducing vibrations and reducing the noise caused by vibrations due to the vulcanized damping plate. In addition, the machines are protected, thus increasing their longevity.

The maintenance-free machine leveler SFEL80 is steplessly adjustable over the thread (depending on the spindle length) and tiltable to a certain degree, which simplifies precise assembly and alignment.

The adjustable angle of inclination of approx. 7.5 ° in each direction guarantees a stable and precise alignment of the machine.

with molded-in mounting plate (tab)
Vibration damping with maximum stability
Noise reduction and protection against slipping due to vulcanized damping plate NBR
Increase the longevity of machines, measuring instruments and products
Compensation for ground irregularities without the need for expensive concrete foundations
Large hex key surfaces for easy height adjustment
Screwed connection between plate and spindle

The delivery of the machine feet or adjustable feet is completely assembled.

Sizes in stock and quickly available (please ask for special sizes) Machine leveler SFEL80:

SFEL80M8x50
SFEL80M8x80
SFEL80M8x100
SFEL80M8x120
SFEL80M8x150
SFEL80M8x180
SFEL80M8x200
SFEL80M8x250
SFEL80M8x300
SFEL80M10x50
SFEL80M10x80
SFEL80M10x100
SFEL80M10x120
SFEL80M10x150
SFEL80M10x180
SFEL80M10x200
SFEL80M10x250
SFEL80M10x300
SFEL80M12x50
SFEL80M12x80
SFEL80M12x100
SFEL80M12x120
SFEL80M12x150
SFEL80M12x180
SFEL80M12x200
SFEL80M12x250
SFEL80M12x300
SFEL80M14x50
SFEL80M14x80
SFEL80M14x100
SFEL80M14x120
SFEL80M14x150
SFEL80M14x180
SFEL80M14x200
SFEL80M14x250
SFEL80M14x300
SFEL80M16x50
SFEL80M16x80
SFEL80M16x100
SFEL80M16x120
SFEL80M16x150
SFEL80M16x180
SFEL80M16x200
SFEL80M16x250
SFEL80M16x300
SFEL80M20x50
SFEL80M20x80
SFEL80M20x100
SFEL80M20x120
SFEL80M20x150
SFEL80M20x180
SFEL80M20x200
SFEL80M20x250
SFEL80M20x300
SFEL80M24x50
SFEL80M24x80
SFEL80M24x100
SFEL80M24x120
SFEL80M24x150
SFEL80M24x180
SFEL80M24x200
SFEL80M24x250
SFEL80M24x300
SFEL80M30x50
SFEL80M30x80
SFEL80M30x100
SFEL80M30x120
SFEL80M30x150
SFEL80M30x180
SFEL80M30x200
SFEL80M30x250
SFEL80M30x300